Product Spotlight – PM2-10-Z Pole Mount

Polar Focus PM2-10-Z Pole Mount is designed to be attached to poles as small as 4 inches in diameter. It is primarily used to mount one or two weather-rated loudspeakers that utilize a yoke or U-bracket.  If you ever have to pole mount speakers, lights, or video screens on permanent poles or poles in tents, you’ll like this great new product!

Polar Focus PM2-10-Z shown with Community R.35

Polar Focus PM2-10-Z is mounted to the pole with 3/16 inch rigging rated
stainless steel chain within a high pressure UV rated rubber hose. The chain is
tightened by an internal bolt carrier, allowing seamless installation and removal.

The contact surface between the pole and the mount is protected from corrosion and abrasion by a UV rated rubber hose. No metal components contact the pole, preserving
the finish of the poles and complying with the latest pole warranty requirements.

See a demo of the PM2-10-Z at Infocomm 2015:

Polar Focus PM2-10-Z Pole Mount can accept a variety of combinations to suit site specifications. Yoke mounted speakers can be attached to the top and bottom of the beam. Multiple mounts may be attached to a single pole at the same height to meet high concentration demands. The PM2-10 will accept any yoke up to 20″ wide that utilizes standard ½ inch or M10 axle hardware. Holes within the PM2-10 allow audio wiring to be run through the interior of the mount for a clean installation.

Polar Focus PM2-10-Z shown with Community Loudspeakers R.15 and R.35
Polar Focus PM2-10-Z shown with Community Loudspeakers R.15 and R.35

Polar Focus PM2-10-Z Pole Mount can accept a variety of combinations to suit site specifications. Yoke mounted speakers can be attached to the top and bottom of the
beam.  Multiple mounts may be attached to a single pole at the same height to meet high concentration demands.  The PM2-10 and attached yokes may be made tamper resistant with the addition of a single tri-groove nut. As with all Polar Focus products, the PM2-10-Z has a 10:1 safety factor, and is designed and manufactured in the USA.

Polar Focus PM2-10-Z shown with Community R.15
Polar Focus PM2-10-Z shown with Community R.15

Polar Focus Pole Mounts are most effective on tapered poles, but can be used on
cylindrical poles in certain conditions. Easily fits tapered poles from 4 inch diameter to 10 inch diameter.  For 10″+ diameter poles, the PM2-10 is your best value for rigging small speakers onto a large pole. Chain and hose kits sold separately depending on
pole diameter.

3 models of the PM2-10 are available:

PM2-1047-Z         Fits 4″-7″ diameter poles

PM2-10710-Z         Fits 7″-10″ diameter poles

PM2-10-Z            Fits 10″+ diameter poles (chain and hose kits sold separately)

See our datasheet for more information on the PM2-10 Pole Mount.

Polar Focus Pole Mounts can be used with many different loudspeaker models and systems. A partial list is shown below, but contact us if your speakers are not listed here:

Community R.15, R.35, R.5, R1, R2, etc. Not suitable for R6

JBL Pro AW, and AW compact

Bose Panaray

Technomad Noho, Soho, Berlin, Chicago, Vernal, Vienna, and Paris

Atlas Soundolier

One Systems loudspeakers

Polar Focus provides the best value, the best products, and the best service in Audio Rigging. Our turnkey systems form a complete transition from the top of your speakers up to and including the roof attachment.  Polar Focus reduces labor cost and variability by providing rigging systems which are pre-assembled to the maximum extent possible.

If you don’t see what you need here for your audio installation, contact our Audio Rigging Consultants at (413) 586-4444.  We can help!

Advertisements