This week we added one of our “Secret Products” to our catalog. Polar Focus has many products that we produce in low volume. At our shop, we call them secret because they haven’t yet been added to our catalog. (This one was just added, but there are many more.)
For this project, Polar Focus supplied two PM2-10-Z Pole Mounts and our weatherized bracket for the JBL CBT 70J-1 and 70JE-1 Line Array Column. This was installed in April by Dustin Treml with Daktronics at the US Lacrosse Headquarters and Training Center in Sparks, Maryland.
This system offers infinitely adjustable pan and tilt control and has been galvanized for weather resistance. Polar Focus PM2-10-Z is zinc plated for corrosion resistance. Custom powder coat colors may be specified as required for particular installations.
Stay tuned for more Secret Products! If you don’t see what you need on our catalog, call us at (413) 586-4444 – we can design a custom product for your application.
If you’re at Infocomm 2016 this week, be sure to stop by the Bose booth, located at C9530, to see the Polar Focus Stingray frame and accessories for Bose RoomMatch. We’re always working with loudspeaker manufacturers to develop innovative and safe rigging solutions.
Recently an installer left the following comment about Polar Focus and Bose RoomMatch on our Facebook page:
“Polar Focus and Bose RoomMatch makes for a great combination! You guys were great to work with on my College of Southern Idaho installation. I can’t say enough.”
If you’re in Las Vegas this week, stop by to see Polar Focus Ultimate Line Array Rigging at booth C11339.
Virginia Military Institute in Lexington, VA has ten beautiful new
Bose RoomMatch clusters installed by Jim Hogan of IES Communications.
Polar Focus supplied components from our Ultimate Line Array Rigging for Bose,
which included our Spine Frame Adapters, PY Quick Disconnect Fittings,
and spreaders. Every cluster is easily adjustable in pan and tilt under full load.
This project came in as a rush and Polar Focus was able to manufacture the white
hardware within the installation timeline. In the photo below, the rigging hardware
is almost invisible.
The RoomMatch clusters truly look great in the venue – looks like speakers floating
in air. Jim had great things to say about how much easier Polar Focus rigging made
the installation process:
“We got it all done, and even had to take down the last 3 and redo because they put the
wrong cabinets on the clusters. The more we did the faster we got. Imagine that!
They went up really easy once we got past the construction issues.”
We were very glad to help, and hope the students at VMI benefit from the new
system for years to come.
Need help rigging, mounting or aiming your loudspeakers or line arrays?
We can help! Call us at (413) 586-4444.
This year at Infocomm Show 2016, we’ll be showcasing our Ultimate Line Array Rigging frames and hardware, featuring infinitely adjustable pan and tilt under full load.
The updated Polar Focus booth will be across the aisle from Danley Sound Labs, and we look forward to learning about your new and upcoming projects.
Visit us at Infocomm 2016 in Booth C113396, or visit our new website at LineArrayFrames.com.
We can custom design rigging to your site specifications and offer a site survey service for customers who need on-site support. If you don’t see the product you need for your application, please contact us. We can design a solution. We also offer PE stamped drawings for our product scope for all 50 states.
Safe, labor saving audio rigging systems are our continuing commitment
to our customers.
Using a Polar Focus Motor Zbeam such as the PY1-MZB-SR5, your line array has infinitely adjustable pan and tilt control under full load while being serviceable from a single hoist.
Compared to the conventional two hoist method, this saves a lot of time and money; and results in more accurate cluster aiming. This configuration is roughly twice the performance at half the price of the common two hoist method. Shown here is the Polar Focus Stingray aftermarket frame for Bose Professional Roommatch loudspeakers. Polar Focus manufactures a wide selection of line array rigging hardware, which is featured on our new website: LineArrayFrames.com. Of course, Polar Focus offers licensed structural engineer PE stamped drawings for our product scope for all 50 states.
Like the image shown, many Polar Focus line array configurations have no shackles and no wire rope. Some configurations have no exposed speaker signal cable, because it is hidden in raceways that are part of the rigging equipment.
Need assistance rigging, mounting or aiming your loudspeakers or line arrays?
We can help! Call us at (413) 586-4444.
The Kestrel frame for Fulcrum Acoustic FL283 line array modules, when used with Polar Focus Ultimate Line Array Rigging accessories, provides control of pan and tilt while under full load. In many configurations, there are no shackles, wire ropes or even signal cables visible.
We enjoyed our visit with Dave and Rich and are looking forward to working with them on this and future OEM rigging solutions. If you’re a loudspeaker manufacturer in need of rigging for your speaker cabinets, please give us a call at (413) 586-4444.
We’d like to introduce our new website, LineArrayFrames.com – created to make it easier for AV integrators to easily find our line array rigging products & accessories.
When customers see this new site, their most typical response is, “Wow, I wish I had seen these products last week/month/year.” Our new line array rigging products are that good.
LineArrayFrames.comprovides you with information about Polar Focus line array rigging hardware. We offer products that work with all standard line array frames providing pan and tilt control under full load. We also offer aftermarket frames for select popular line array models.
Our new website allows our clients to view a full selection of line array frames and accessories, making your next design or installation project easier than ever.
Polar Focus® PY Quick Disconnect Fitting is a simple yet powerful new component designed to allow a broad range of speaker grids to be easily
and quickly pinned to our standard line array frames.
Components available can be viewed by speaker manufacturer by clicking the manufacturer’s name in the top right navigation bar links. Any component from Column A on the website can be easily pinned to any component from Column B. Polar Focus PY Quick Disconnect Fitting is for use in permanent installs, road applications, seismic applications, and crank tower applications.
We’ve recently designed new line array frames to add to our already extensive OEM product offerings:
All of our line array frames are easily connected to our rigging accessories
with Polar Focus PY Quick Disconnect Fitting.
Polar Focus can custom design rigging to your site specifications and offer a site survey service for customers who need on site support. If you don’t see the product you need for your application, please contact us. We can design a solution.
Safe, labor saving audio rigging systems are our continuing commitment to our customers. Polar Focus offers structural engineer PE stamped drawings for our product scope in all 50 states.
Need help rigging, mounting, or aiming your loudspeakers or line arrays?